Top 20 Faux snake plant, You are going to absolutely love it.

Faux snake plant, Sansevieria, often known as the snake plant or Sansevieria pratensis, is a member of the Liliaceae family. Tongue and bowstring-hemp of my “politically correct” mother-in-law. When it comes to apartment dwellers who struggle with houseplant care because of poor illumination, Sansevieria is a good option.

A closer inspection of the Faux snake plant is in order. When it comes to beautiful Faux snake plant that can withstand the worst growth circumstances, neglect, and abuse, Sansevieria tops the list. Sansevieria is a tough opponent to overcome. The sword-like foliage of the snake plant makes it a traditional yet versatile houseplant. As a top interior air purifier, it’s a great choice for the forgetful gardener.

Faux snake plant:

Because of their ability to undertake Crassulacean Acid Metabolism, the above Faux snake plant can also take in CO-2 throughout the night (CAM). In photosynthesis, there are two routes. O2 is liberated from water vapour in these visible processes. Carbon dioxide (CO2) is needed to produce sugars in the dark reaction (Calvin Cycle).

Sunlight provides the energy needed to power these reactions. Stomata absorb CO2 and emit O2 in the same process. The plant’s stomata open at night to limit water loss in CAM photosynthesis, also known as Crassulacean-Acid metabolism. Malate is a form of CO2 taken in and stored in vacuoles.

Aids in the battle against allergies and the sick building syndrome

Oxygen and poisons are removed from the air by the Faux snake plant. Airborne allergens can be reduced because of the plant’s moisture release.  As a result, those who suffer from allergies should seek these plants as a natural and inexpensive means of staying healthy. As a result, people in public places and businesses need to know that air-purifying plants are beneficial.

The term “sick building syndrome” (SBS) refers to the onset of mild to severe health problems in residents or occupants of a building, but no single ailment is to blame. Poor indoor air quality may contribute to many of the symptoms associated with SBS. Coughing, itching, nausea, lack of concentration, weariness, and tightness in the chest and muscles are all symptoms of sinusitis. On the other hand, the symptoms fade after people leave the building. It’s all about Feng Shui and placement.

Toxins are absorbed by the leaves of the Faux snake plant, which then emit pure oxygen into the air. The Sansevieria, on the other hand, is a great choice for the bedroom. In the absence of photosynthesis, most plants exhale carbon dioxide at night; the Sansevieria, on the other hand, produces oxygen.

There are few plants better at filtering out formaldehyde than mother-in-tongue; the law’s also known as mother-in-tongue. Law’s Put one in your bathroom, where it can grow in low light and damp circumstances while removing air contaminants from the air. The Snake Plant (Sansevieria trifasciata), also known as Mother-in-Tongue, is sometimes regarded as a bad Feng Shui plant.

On the other hand, the Snake Plant has powerful feng shui qualities that can be highly beneficial in specific areas of a home or workplace. To protect yourself from negative Chi, spiky plants such as snake plants should be placed away from frequently visited locations. The snake plant is an ideal symbol of ch’i’s upward movement.

Negative or sluggish energy is easily cut through by strong wood energy. Your workplace or home’s finest location for plants is in an area enriched by the plant’s Wood element. Plants should be placed in the southeast, south, and eastern corners of the room. The Eight Gods bestowed their eight virtues on anyone who held this plant. Therefore the Chinese used it as a valued house plant. The eight virtues are wealth, good looks, a long life, wisdom, good health, artistic ability, and poetic strength. According to pre-Feng-Shui, they planted the plants near the entrance of their home to allow the eight qualities to enter.

Sansevieria ballyi, popularly known as the dwarf Faux snake plant, is native to southern Kenya and Tanzania. Dr. Peter R. O. Bally, a Swiss botanist working at Nairobi’s Coryndon Museum, inspired the name. Many of the succulent species in East Africa have his name, which he used to describe and name them.

2-4″ long and 1/4″ thick are the maximum dimensions of the leaves of Sansevieria ballyi, a species of Sansevieria. A red-brown spine grooved on the face forms the apex’s crest. Rosettes and stolons are covered in scale leaves. It is a flowering plant with pale greenish-white flowers that reach up to one inch in length and are clustered on a six-inch-long raceme. Two flowers are frequently found in each cluster. The Faux snake plant only grows to a maximum of 10 inches in height.

Temperature and Light

This Faux snake plant can thrive in almost any light, from full sun to shady areas. It is tolerant of low light levels; however, intense filtered light is required for the best growth. Leaves turn a darker green colour and become etiolated and longer and thinner than typical when exposed to low light. A north-facing window or a bright sunny window with some cover from the brightest periods of the day would be ideal for growing the miniature snake plant indoors.

The edges of the leaves will turn yellow if the light is too bright. Although Sansevieria ballyi can withstand temperatures as low as -4°C (-25°F), normal growth requires protection from cold temperatures and avoiding winter rainfall. Higher temperatures (16-24 °C) are preferable, such as those between 60 and 75 °F.

The relationship between water and relative humidity

In the growing season, water your dwarf sansevieria simply once a week because it is drought tolerant. Avoid overwatering the soil by allowing the top 1 inch to dry out between waterings to avoid root rot. In winter, just enough water should be applied to the soil to keep it from drying out completely. Ensure the area where you wish to place your plant is dry enough. Because of this, they are not tolerant of humid conditions.


Like most other xerophytic plants, Sansevieria ball thrives in a well-drained potting mix. Soil with a pH of 6.5 or below is good for plant growth. Gravel, perlite, and decomposed granite can all be used to help with drainage and weight distribution.


Sansevierias are low-maintenance plants. You can apply a balanced fertilizer mixture once a month during the summer. Reduce the concentration to half of what is specified in the container. Winter is not the time to fertilize.


Slow-growing Sansevieria ballyi. When the roots of your Sansevieria overflow the pot, you can report it every 2-3 years into a larger container. Add commercial lightweight cactus mix to the container. Remove the plant from its current container while the soil is dry to make repotting easier.


The best techniques for vegetative propagation are division and leaf cutting. The plantlets that form at the end of each stolon should be removed and rooted as soon as possible. Do not remove a plantlet until it has formed stilt roots while rooting it. It’s important to be patient because the plantlets need time to develop their rosette of leaves before they can begin to establish roots. You can cut the stolon at any stage and put the new plant in moist and porous soil once the stilt roots have grown sufficiently long. At least one inch in length is recommended.


When it comes to pruning, you don’t have to do it if you don’t want to. When necessary, remove any dead or damaged leaves. A mature plant may benefit from pruning if you want it to appear fuller and denser.

Increasing Issues

Under typical circumstances, you won’t have any severe issues with your plants. Overwatering is the most typical problem, as this plant rots quickly in moist soil. Mould and fungal growth will develop on the plant’s leaves and roots if it is overwatered. The roots become mushy and discoloured as a result. Leaves turn yellow, wilt, and droop as the disease spreads. When the temperature drops below 55 °F (13 °C), do not leave the dwarf snake plant outside since this can cause cold damage to the plant, resulting in scarred leaves.


The most likely pests are mealybugs and spider mites. Take a cotton swab, dip it in rubbing alcohol, and then clean the leaves with it if you find mealy bugs. This problem can be completely eradicated with a systemic insecticide. Wipe with rubbing alcohol the same way you would if dealing with a spider mite infestation. You may have to remove the sick parts of the plant if the infestation is severe.


None of Sansevieria bally’s diseases can affect it. Root rot is the most common cause of their fungal diseases. Using fungicides and ensuring that the soil is free-draining and not kept damp can be used to treat them.