How to Fix an Issue LG dryer, not heating?

If you just bought an LG dryer and it’s giving you trouble, don’t worry! Some of the most common issues with this dryer will be addressed in this article, such as heating or drying elements. If the heating element in your LG dryer is working properly, but it’s not heating up, you should reset the dryer.

Cause of Lg dryer not heating:

When your heat sensor keeps going off, here are some possible causes and solutions:

  • Problems with the heat sensor
  • It’s possible that you have a faulty heat sensor and will have to buy a new one.
  • Vents that are clogged

Please continue reading to learn about common dryer problems and how to fix them. You may even be able to fix your dryer yourself and save hundreds of dollars by not hiring a technician.

How to Fix an Issue LG dryer, not heating?

To get your heating to work properly again, you’ll need to take different steps depending on whether you have a gas or electric log dryer, not heating. Here’s what you should do.

Step 1: Disconnect your dryer from the wall outlet or other power source. It is for your good and to keep you from getting electrocuted.

Step 2: Use a screwdriver to remove the plastic cover from the side access hole.

Step 3: When the cover is off, you’ll see a button with a red and white wire coming out of it. The button, which is most likely black, will be situated in the middle of two electrical connections.

Step 4: Push the button from inside by reaching in. If you hear a clicking noise, your dryer has been reset and is ready for use.

Step 5: Your dryer’s heating unit should now be up and running if everything goes well. If it doesn’t, you’ll have to swap out the faulty component.

Step 6: If you have an electric dryer, however, follow these steps:

Step 7: Remove the dryer’s electrical cord from the wall.

Step 8: The machine’s plastic cover is secured with four screws.

Step 9: For steam, remove the water container.

Step 10: Remove the cap.

Step 11: Remove the front panel by unscrewing all of the screws holding it to the machine.

Step 12: Remove the front panel if it’s still on there. To access the electric heating component, you must first complete this step.

Step 13: Verify whether or not the heating panel’s lead wires work with a multi-tester. You should hear a beeping sound if everything is working properly.

Step 14: A broken part means you need a new heater if you don’t hear the auditory beep for any of the leads.

Use a multi-tester:

If you’re certain the issue is due to the high limit, you can try cleaning the vent tube. Overheating and a blown a fuse are the most common obstructions resulting in the vent tubes that cause high-limit fuses to blow.

Step 1: Make certain to remove all of the lint from the machine. This dryer lint is flammable and could ignite a small blaze if left unattended.

Step 2: all the components are in the same order as they were removed.

Step 3: Check if your heater is functioning properly by running it for one complete revolution.

Step 4: This instructional video can help you if you’re unsure how to do any of these things.

Step 5: The heating element in your dryer may need to be replaced if this does not fix the problem.

Step 6: Ask a company representative or a technician in your area if they have the necessary parts to fix your dryer.

The LG dryer is heating but not drying:

A lint buildup is the most likely cause of your dryer not drying properly even after it’s been heated. Clothes still feel damp after a cycle because of lint and other obstructions in the home exhaust system or the dryer’s internal vents that reduce airflow. To get your machine back up and running, follow these steps:

Step 1: Remove the lint from the filter and clean it.

Step 2: To clean it, remove it from the machine and lift it out.

Step 3: No matter how thoroughly you clean your dryer’s lint filter, there may still be debris in the hole where it is installed.

Step 4: This will prevent your clothes from drying properly.

Step 5: To get rid of the lint, use a Lint Lizard vacuum or a shattered plastic coat hanger.

Make sure the vent hood on your car isn’t blocked by anything.

Go outside and clear any visible obstructions from the dryer’s exhaust vent after setting it to a regular cycle. Also, make sure there’s enough airflow in the system. If the vent isn’t getting enough air, there’s probably something clogging it up.

Remove anything that may be obstructing:

Remove any visible obstructions by unplugging your dryer and cutting the duct connection to your dryer. Vent blockages can be difficult to detect, especially if the vent pipe is convoluted with many bends and kinks. Professional ductwork cleaners will need to remove the debris if this is the case.

What Should You Do If the Cooling Button on Your LG Dryer Remains On?

It is normal for your electric dryer’s cooling indicator to remain illuminated while it is drying. Drying cycles have a drying light that goes on and off, but the cooling light stays on until the last five minutes of drying when it starts to flash like the drying light. It is because the drying light flashes on and off.

Error Codes on My LG Dryer:

These three numbers represent the 1980s, 1990s, and 1995 respectively. These error codes are a sign that the exhaust duct is clogged with lint. Remove the lint to fix the problem of the LG dryer, not heating. The dryer’s thermistor is malfunctioning, as indicated by this error code. Hold the start button for five seconds while unplugging your dryer to restart it.


A technician will help you with dryer repair if you run into any additional problems or if the solutions provided in this article do not resolve your issues. Even though it’s more expensive, you’ll spend less time figuring out how to fix your issue of the LG dryer not heating it back together incorrectly. If you’re not sure you can handle the more complicated mechanisms, it’s best to call in a professional. Lg dryer not heating, Lg dryer not heating, Lg dryer not heating, Lg dryer not heating.

Read also: How do I change the power cord on my TV?

Leave a Comment